FAQ

How much does it cost to rewire a flat (apartment) in Spain?

Rewiring a 70 to 100 m2 flat in Spain costs roughly 3,600 to 6,500 euros plus VAT, including a new fuse board, cabling, circuits, switches and sockets and the boletín certificate, and can approach 7,000 euros in very old homes. A partial rewire starts at about 1,700 euros. The final price depends on the number of points and the chasing.

Rewiring cost in Spain in 2026

These are market reference prices, as a guide and excluding VAT (add 21 % VAT):

CaseGuide price
Full rewire of a 70 to 100 m2 flat3,600 to 6,500 €
Very old housesup to about 7,000 €
Flats over 80 m2from 6,000 € according to some guides
Partial rewirefrom 1,700 €
Average full electrical renovationabout 3,500 €
Fuse board (consumer unit) only300 to 1,200 €

Figures vary so much because pulling new cable through existing conduits is very different from cutting new chases (channels) in every wall.

What a full rewire includes

  • New cabling with the right cross-section for each circuit.
  • New conduits, junction boxes, switches and sockets (outlets).
  • A fuse board with main switch, RCDs, MCBs and a surge protector.
  • Earthing (grounding) connected to every circuit.
  • Separate circuits as Spanish regulations require: lighting, sockets, cooker and oven, washing machine and water heater, bathroom and so on.
  • The boletín (electrical installation certificate) registered with the regional industry department.

What the price depends on

The electrification level

A home with basic electrification (electrificación básica) has five circuits and a minimum power of 5,750 W. If you want air conditioning, a tumble dryer or electric heating, you need high electrification (elevada), with more circuits and a minimum of 9,200 W. More circuits means more cable and more protection.

Chasing and building work

Cutting and filling chases costs roughly 15 to 35 euros per linear metre. If the flat is being fully renovated, it pays to do the wiring at the same time.

The starting point

Fabric-covered or aluminium cables, no earthing or an undersized individual riser cable all push the cost up.

Signs your flat needs it

Sockets with no earth, one RCD or none at all, old cables, breakers that trip often, sockets that get hot, or an installation more than 25 or 30 years old.

How to get a quote

Ask for a visit and a fixed, itemised quote: fuse board, number of points, metres of chasing, earthing and boletín. That way you can compare offers properly. In Seville, Spain we do this through our rewiring old apartments service. Rates on our prices page and more answers in our FAQ.

Need an electrician in Seville, Spain?

Call us or send a WhatsApp message with a photo of the job. You get a fixed quote before any work starts.